EPOXY RESIN/SPECIAL CLEAR HARDENER 105/207-B 6.45KG 3157100001

AED 1,300.00 exc. VAT

Best Use Waterproof and Bond Wood Fiberglass and Metals
Manufacturer WEST SYSTEM
Capacity 6.45kg ( Epoxy Resin 5kg / Special Clear Hardener 1.45kg )
Manufacturer Part Number 105/207-B
Type Kit
Mix Ratio: 3 parts resin : 1 part hardener
Associated pumps 303B

 

Description

105 EPOXY RESIN / 207-B SPECIAL CLEAR HARDENER 6.45 KG

Product Overview

105 Epoxy Resin 5kg

105 Epoxy Resin is a clear, pale yellow, low-viscosity liquid epoxy resin. Blended with hardener at the proper ratio, it cures to a hard, solid plastic with superior physical properties. Based on which hardener you choose, it cures at a wide range of temperatures.  Once cured, it forms a high-strength solid that is functionally waterproof, and highly resistant to moisture vapor.  Multiple coats of a west system 105 Epoxy Resin create a superior moisture barrier and a tough, stable base for paints and varnishes. Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. With roller application, it possesses thin-film characteristics such as excellent flow out and the ability to self level without fish-eyeing.

207 Special Clear Hardener 1.45kg

Blush-free 207 Special Clear Hardener was developed for coating and fiberglass cloth application where an exceptionally clear, moisture-resistant, natural wood finish is desired. Blended with 105 Epoxy Resin, 207 Hardener will not blush or turn cloudy in humid conditions. Thin film applications roll out and tip off smoothly, requiring less sanding in preparation for finish coatings.

Mix Ratio: 3 parts resin : 1 part hardener
Pot life at 72°F (22°C): 20 to 26 minutes
Cure to a solid state: 10 to 15 hours
Cure to maximum strength: 4 to 7 days
Minimum recommended temperature: 60°F (16°C)

Use mini pumps to get the mix right.

Mixing 105 207-B 6.45kg Epoxy Resin at the correct ratio is critical. Calibrated pump sets are offered for accurate metering of all Group Size A, B, and C WEST SYSTEM and hardeners.

Choose from a variety of additives to customize the mix.

Epoxy Resin can be mixed with a variety of fillers and additives to suit specific needs, such as sag resistance, sandabilty or to increase its strength. Specific fillers also can be used to convert 105 Epoxy Resin into an excellent adhesive to suit a wide variety of bonding needs.